Replacement coils for Joyetech eGo One Atomizers
- ego One CL 0.5ohm - Lung Inhale
- Unscrew the metal bottom cap from the tank.
- Pour out any remaining E-Liquid (set aside to refill)
- Unscrew the old head from the bottom cap.
- Screw the new head onto the bottom cap.
- Fill tank with E-Liquid and reassemble
- For best results, wait a couple minutes for the E-Liquid to feed the coil before vaping again.
- Pack of 5 Replacement Coils
*WARNING: These are sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using sub-ohm coils. These coils will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 25A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, Ohm’s Law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email. Atomizer tank sold separately. Use at your own risk.